Cleo Shower & Tap Filter - Water Science

Rating:
80% of 100 4 5
Loading...
FREE Shipping
₹2,290 ₹2,295
In stock

SKU

SFU_717
Everytime you shower, your hair and skin meet their worst enemies chlorine and hard-water. Dermal absorption of Chlorine draws away moisture...
More
  • Use Code: GRAND10 to get 10% instant discount on all orders.(Max. Discount Rs. 200)
  • 5% additional discount on all prepaid orders (Max. Discount Rs. 100)
  • Use Code: RUPAYSEN15 to get 15% discount on Rupay Debit and Credit Cards. (Max. Discount Rs. 1500)
  • Use Code: BOBSEN20 to get 20% discount on Bank of Baroda Credit Cards. (Max. Discount Rs. 1500)
For any queries : Call @ +91 82910 51868 / +91 82910 51869

Description

One of the best ways to protect your skin and hair from harmful contaminants like chlorine is by using a shower filter. One can experience itchiness, dryness and irritation after showering in unfiltered tap water. The Cleo Shower and Tap Filter by Water Science is effective at reducing contaminants like chlorine, lime and bacteria to inhibit the growth of mold and algae. It features a patented KDF technology from KDF fluid treatment USA, that eliminate up to 95% chlorine in your water. The filter suspends and dissolves micro-particles and impurities to remove unpleasant odor. You can install the shower filter to your standard wall shower, hand-held shower or even bath tap with the do it yourself installation kit by Water Science.
The CLEO Shower and Tap filter can be connected to a wide range of bathroom fittings including wall and overhead showers, hand-held showers, taps and faucets, etc. This product has a cartidge life of 25,000 ltrs or 6 months, whichever is earlier. The actual life depends on usage and water quality

Benefits of use
  • Reduces hair fall, by eliminating chlorine and hard water salts
  • The KDF and nano silver carbons prevent chlorine from damaging your skin
  • Inhibits the growth of bacteria
  • Keeps your bathroom walls and floors limescale free
  • Eliminates bad odor
How to install the Cleo Shower and Tap Filter on wall / overhead-showers

  • Remove your showerhead from the shower arm and to remove any debris present on the thread pipe, clean it with a piece of sandpaper
  • Ensure 2 washers are inserted into the top connector of the CLEO
  • Wrap the bottom connector thread with Teflon tap tightly around the thread to prevent leaks
  • Turn the Cleo top connector until it fits in the thread perfectly
  • Flushing – Turn on the shower for 3 minutes to flush out any discolored water with carbon dust
  • Align the bottom thread connector of your CLEO with the shower-head connector and rotate clockwise to tighten fully
  • You will need to use a washer for the shower head connector as well
  • Ensure there are no leaks and if required make use of the spanner to tighten it further
  • Instructions are the same for wall mounted shower arms and overhead showers

How to install the Cleo Shower and Tap Filter on hand-shower fixtures

  • Disconnect the hose from the tap and to remove any debris present on the thread pipe, clean it with a piece of sandpaper
  • Ensure at least 2 washers are inserted into the top connector of the CLEO
  • Wrap the bottom connector thread with Teflon tap tightly around the thread to prevent leaks
  • Align the top connector of the CLEO with the thread connector of the tap and rotate clockwise to tighten
  • Turn the Cleo top connector until it fits in the thread perfectly
  • Flushing – Turn on the shower for 3 minutes to flush out any discolored water with carbon dust
  • Align the hose connector of your hand-shower with the bottom thread connector of your CLEO and rotate clockwise to tighten fully
  • Use a spanner to tighten fully. If there are leaks, check/insert washer and tighten again

How to install the Cleo Shower and Tap Filter on taps and faucets

  • Remove the aerator from the faucet / tap and connect the aerator-adaptor to the tap
  • Wrap the connector thread of the adaptor with Teflon tap tightly around the thread to prevent leaks
  • Ensure at least 2 washers are inserted into the top connector of the CLEO
  • Align the top connector of the CLEO with the thread connector of the tap and rotate clockwise to tighten
  • Flushing – Turn on the shower for 3 minutes to flush out any discolored water with carbon dust
  • Use a spanner to tighten fully. If there are leaks, check/insert washer and tighten again
  • CLEO will fit on all standard taps & faucets with a 24 mm aerator

Features
  • Reduces hair fall, protects skin and removes bad odours
  • Gives a clean and healthy shower experience
  • Unique 4-layer filter with KDF technology and nano silver carbon
  • Reduces chlorine, effects of hard water and removes impurities
  • Prevents Bacteria

Product Specifications

Shape Rectangular
Product Types Cartridge/Filter
SKU SFU_717
Color White
Material Plastic
Return Policy 15 Days Return
The product you return must be unused and in the original condition with all the tags and receipts
Brand Water Science
Customer Reviews
  1. 80%
    works

    By

    on

    tap water filter works fr our home. hard water problem solved
    Comment Was this helpful? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
Post a comment
as
Cancel
As : You're reviewing: Cleo Shower & Tap Filter - Water Science
Your Rating
Note: Image size must be less than 10MB

    © 2017 - 2019 SENIORITY.IN. ALL RIGHTS RESERVED. Terms of UsePrivacy Policy