Talking Alarm Clock With Projector - Seniority

Seniority presents Talking alarm clock which comes with a speaker and projector. It has an LCD display which shows the time and temperature and the sign for when you’ve set the alarm. You can time the voice and projection by pressing the button on the spherical top of the clock. The projector enlarges the time and temperature on the surface towards which, the projector is pointed. It has five types of music alarms and a built-in speaker which offers clear sound. You can switch between 12/24-hour time format and between Fahrenheit/Celsius temperature readings. The colour of the backlight can be adjusted between Green and Blue. It supports 15-hour intelligent voice reporting and 10-minute snooze. You can charge the clock through the DC 5V charging port and it works with 3 x 1.5V AAA batteries when not plugged in.

Operation:

• To install the battery: Remove the battery compartment door and insert the batteries into the slot after checking the “+” and “-“ ends.
• Under any mode, press top button for the time to be displayed with the backlight and projection.
• Under normal mode, press MIN/sound key to enter the following modes: Normal setting, time setting and alarm setting. Press MIN/SOUND key to adjust minutes. press HR key to adjust hours.
• Alarm time setting: Under normal display, press ‘mode’ key twice to enter the alarm setting mode, then press the MIN/sound key to adjust minutes and press HR to adjust hours.
• ALM and CHM On/Off switch: Under normal mode, press MODE key three times to enter into the ALM and CHM setting mode, then MIN/SOUND key to turn on/off the alarm function. If the alarm function is on, its sign will be displayed on the screen. Press HR key to turn on/off CHIME function. If the chime function is on, it will be displayed on the screen.
• Under normal display, press MIN/SOUND key to choose the alarm sounds. Press HR to switch between 12/24-hour time mode. Press the key for 2 seconds to switch between Fahrenheit/Celsius.